JUAL ACTIVATED ALUMINA / DESICCANT
Activated alumina is a very porous form of aluminum oxide of
high surface area which adsorbs liquids and gases without any change in form.
Activated aluminas will not soften or disintegrate when immersed in liquids.
Activated alumina may be regenerated I to its original adsorption efficiency by
heating to a temperature between 350-600° F ( 177-316° C) .
Color: White
Benefits:
• Uniform ball size
• Low abrasion
• High crush strength
• High adsorptive capacity
Our stock with size: 1/ 8” , 3/ 16” & ¼ ”
Kami menjual ACTIVATED ALUMINA
Ready Stock
Size :
1/ 8 Inch ( 3.2mm) = 5.000 Kg
3/ 16 Inch ( 4.8mm) = 5.000 Kg
1 / 4 Inch = 1.000 Kg
STOCK BERUBAH SETIAP SAAT.
Suhu Max Regeneration : 200 C
Fungsi : Untuk DESICCANT di Instrument Air Dryer Unit
ACTIVATED ALUMINA
Avtivated Alumina digunakan sebagai adsorben dan katalis
diantaranya untuk menyerap air di dalam udara. Activated Alumina Dibuat Dari Aluminium Hidroksida Dengan
Proses Dehydroxylating Menghasilkan Bahan Yang Sangat berpori dan memiliki Luas
Permukaan Lebih Dari 200 Meter Per Gram. Penggunaanya diantaranya:
• Activated
Alumina Digunakan Untuk Berbagai Macam Aplikasi Adsorben Dan Katalis
Termasuk Adsorpsi Katalis Dalam Produksi
Polyethylene, Produksi Hydrogen Peroksida Dan Sebagai Adsorben Selektif Untuk
Bahan Kimia Arsenic, Fluoride, Dab Belerang.
• Digunakan
Sebagai Pengering, Dengan Cara Adsorpsi. Air Di Udara Terperangkap Di Pori Pori
Alumina Sehingga Udara Menjadi Kering Saat Melewati Alumina. Proses Pengeringan
Ini Bersifat Reversibel. Jika Activated
Alumina Sudah Jenuh Dengan Air Bisa Diaktifkan Lagi Dengan Dipanaskan Sampai
Dengan Temperatur 200 C, Maka Air Yang Terperangkan Akan Terlepas. Proses Ini
Disebut Dengan Regenarasi
Tersedia Dalam Ukuran:
1/ 8 Inch ( 3.2Mm)
3/ 16 Inch ( 4.8Mm)
1 / 4 Inch
Activated Alumina Desiccant
Activated alumina is a high-surface-area, highly porous form
of aluminum oxide. It can adsorb gases and liquids without changing its form.
It works as a desiccant through adsorption. As air passes through the alumina,
the water in the air sticks it and becomes trapped and air that passes through
an activated alumina filter is dried out.
Even if immersed in a liquid,AA won't fall apart or soften.
You can restore the original adsorption efficiency of
activated alumina by heating it to any temperature from 350° to 600°F (177° to
316°C). When the the desiccant is heated as described above, the water stored
in it is released. This means that
filters with AA can be reused over and over again.
Air and Gas Drying
.
